Density
Required practical 5 · 4.3 Particle model of matter · Spec 4.3.1.1
Aim: Find the density of a regular solid, an irregular solid and a liquid.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Top-pan balance: Measures mass.
- Ruler: Measures the sides of the regular solid.
- Eureka can: Displacement can: the water pushed out by the stone equals the stone’s volume.
- Measuring cylinder: Measures the volume of the liquid and of the water from the eureka can.
Method
Show the method
- Measure the mass of the cube, then measure its sides with a ruler and work out its volume.
- Measure the mass of the irregular stone.
- Fill a eureka can until water runs out of the spout, and put a measuring cylinder under the spout.
- Lower the stone in gently on a thread and measure the volume of water pushed out.
- Measure the mass of an empty measuring cylinder, add 50 cm³ of liquid and measure the mass again.
- Calculate each density using ρ = m ÷ V.
The variables
To find the volume of the stone, what do you measure?
Show answer
The volume of water it pushes out of the eureka can
An irregular object’s volume equals the volume of water it displaces.
How do you find the mass of just the liquid?
Show answer
Mass of cylinder with liquid minus mass of the empty cylinder
Subtracting the empty cylinder leaves the mass of the liquid. (You can also zero, or tare, the balance.)
Why take three readings for each object?
Show answer
To spot any odd readings and find a mean
Repeats make the result more precise and show up anomalies.
Remember
- ρ = m ÷ V. Units: kg/m³ or g/cm³ (1 g/cm³ = 1000 kg/m³).
- Regular solid: volume from length × width × height.
- Irregular solid: volume of water displaced in a eureka can (or the rise in a measuring cylinder).
- Liquid: mass of a known volume (zero the balance with the empty cylinder, or subtract its mass).
- Read the meniscus at eye level; repeat and take means.
Exam-style questions
Why lower the stone into the eureka can gently?
Show answer
So water does not splash out, which would make the volume too big
Splashed water would be counted as displaced water.
Why read the measuring cylinder at the bottom of the meniscus, at eye level?
Show answer
To read the volume accurately, avoiding parallax
Reading from above or below gives the wrong value.
A block has a mass of 540 g and a volume of 200 cm³. What is its density?
Show answer
2.7 g/cm³
ρ = m ÷ V = 540 ÷ 200 = 2.7 g/cm³.
Play next
- 🧪 Next: Melting ice: latent heatExtra practical. Heat crushed ice, plot a heating curve and use it to estimate the specific latent heat of fusion of ice.
- 🧪 Previous: Thermistor and temperatureExtra practical. Find out how the resistance of a thermistor changes with temperature.
- 🧪 All AQA GCSE Physics practicalsDo all ten required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Physics revisionEvery topic, with questions and answers, quizzes and crosswords.
