AQA GCSE Combined Science: Trilogy · Virtual Lab

Temperature changes

Required practical 10 · 5.5 Chemistry: Energy changes · Spec 5.5.1.1
Aim: Find how the volume of sodium hydroxide added to hydrochloric acid affects the highest temperature, and find the volume needed to neutralise the acid.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Polystyrene cup and lid: A good insulator, so less energy is lost to the surroundings.
  • Beaker: Stands the cup in, so it cannot fall over.
  • Measuring cylinders: Measure the acid and each 5 cm³ of alkali.
  • Thermometer: Measures the highest temperature after each addition.
  • Safety goggles: Acids and alkalis harm eyes.

Method

Show the method
  1. Measure 30 cm³ of dilute hydrochloric acid into a polystyrene cup standing in a beaker.
  2. Record the starting temperature of the acid.
  3. Add 5 cm³ of sodium hydroxide solution, put the lid on and stir.
  4. Record the highest temperature reached.
  5. Add another 5 cm³, stir, and record the highest temperature again.
  6. Carry on until 40 cm³ has been added, then plot temperature against volume.

The variables

  1. What is the independent variable?

    Show answer

    The volume of sodium hydroxide added

    You add it 5 cm³ at a time.

  2. What is the dependent variable?

    Show answer

    The highest temperature

    Record the highest reading after each addition.

  3. Why use a polystyrene cup with a lid?

    Show answer

    It reduces energy lost to the surroundings

    Polystyrene is a good insulator; the lid stops losses from the top.

Remember

  • Exothermic: gives out energy, temperature rises (neutralisation, combustion).
  • Endothermic: takes in energy, temperature falls (thermal decomposition, citric acid + sodium hydrogencarbonate).
  • Polystyrene cup with a lid in a beaker cuts energy losses; stir and read the highest temperature.
  • The peak on the graph shows the volume needed for neutralisation.

Exam-style questions

  1. After the peak, why does the temperature fall as more alkali is added?

    Show answer

    No more reaction happens, and the cooler alkali cools the mixture

    Once all the acid is used, the extra alkali just takes in energy.

  2. Which of these is endothermic?

    Show answer

    Thermal decomposition

    Endothermic reactions take in energy, so the temperature falls (or heat must be supplied).

  3. On a reaction profile for an exothermic reaction, the products are…

    Show answer

    lower in energy than the reactants

    The difference is the energy given out.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.