Electrolysis
Required practical 9 · 5.4 Chemistry: Chemical changes · Spec 5.4.3.4
Aim: Electrolyse solutions with inert electrodes and identify the product at each electrode.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Low-voltage dc power supply: Makes positive ions go to the cathode (−) and negative ions to the anode (+).
- Two graphite electrodes: They are inert, so they do not react with the products.
- Beaker: Holds the solution being electrolysed.
- Small test tubes: Collect any gas from each electrode.
- Blue litmus paper: Damp litmus is bleached by chlorine.
- Wooden splints: Squeaky pop with a lit splint (hydrogen); a glowing splint relights (oxygen).
- Safety goggles: Protect your eyes from the solutions.
Method
Show the method
- Pour the solution into a beaker and put in two graphite electrodes so they do not touch.
- Connect the electrodes to a low-voltage dc power supply.
- Fill two small test tubes with the solution and turn them upside down over the electrodes.
- Switch on and watch both electrodes for bubbles, a coating or a colour change.
- Test any gas: a squeaky pop (hydrogen), relights a glowing splint (oxygen), bleaches damp litmus (chlorine).
- Switch off, clean the electrodes and repeat with the next solution.
The variables
What is the independent variable?
Show answer
The solution being electrolysed
You change the solution.
What is the dependent variable?
Show answer
The product made at each electrode
You identify each product with a test.
Why use graphite electrodes?
Show answer
They are inert, so they do not react with the products
Inert electrodes take no part in the reaction.
Remember
- Cathode (−): the metal if it is less reactive than hydrogen (copper), otherwise hydrogen.
- Anode (+): the halogen if halide ions are present (chlorine, bromine), otherwise oxygen.
- Tests: hydrogen squeaky pop; oxygen relights a glowing splint; chlorine bleaches damp litmus.
- Inert graphite electrodes, not touching; low-voltage dc supply.
- OIL RIG: reduction (gain of electrons) at the cathode, oxidation at the anode.
Exam-style questions
Which half equation happens at the cathode in copper(II) chloride solution? (Higher)
Show answer
Cu²⁺ + 2e⁻ → Cu
Positive ions gain electrons at the cathode: reduction.
Why must the electrodes not touch?
Show answer
It would short-circuit, so no electrolysis would happen
The current would go straight from one electrode to the other.
What is the test for chlorine?
Show answer
It bleaches damp litmus paper white
Squeaky pop = hydrogen; limewater milky = carbon dioxide.
Play next
- 🧪 Next: Temperature changesRequired practical 10. Find how the volume of sodium hydroxide added to hydrochloric acid affects the highest temperature, and find the volume needed to neutralise the acid.
- 🧪 Previous: Making saltsRequired practical 8. Make pure, dry crystals of copper sulfate from insoluble copper oxide and dilute sulfuric acid.
- 🧪 All AQA GCSE Combined Science: Trilogy practicalsDo all 21 Trilogy required practicals, plus extra ones for most topics: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Combined Science: Trilogy revisionEvery topic, with questions and answers, quizzes and crosswords.
