AQA GCSE Combined Science: Trilogy · Virtual Lab

Rates of reaction: disappearing cross

Required practical 11 · 5.6 Chemistry: The rate and extent of chemical change · Spec 5.6.1.2
Aim: Find out how the concentration of sodium thiosulfate affects the rate of its reaction with hydrochloric acid, by timing how long a cross takes to disappear.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Conical flask: The reaction mixture goes cloudy in the flask.
  • Measuring cylinders: Measure the thiosulfate, water and acid.
  • Paper with a black cross: Put under the flask; time how long until you cannot see it.
  • Sodium thiosulfate solution: Diluted with water to make different concentrations.
  • Dilute hydrochloric acid: The same volume and concentration each time.
  • Stopwatch: Times how long the cross takes to disappear.
  • Safety goggles: Protect your eyes from acid.

Method

Show the method
  1. Draw a black cross on paper and stand a conical flask on it.
  2. Measure the sodium thiosulfate solution and water into the flask (50 cm³ in total).
  3. Add 5 cm³ of dilute hydrochloric acid, swirl and start the stopwatch.
  4. Look down through the flask and stop the clock when the cross disappears.
  5. Repeat with different amounts of thiosulfate and water (same total volume).
  6. Work out the rate as 1000 ÷ time and plot it against concentration.

The variables

  1. What is the independent variable?

    Show answer

    The concentration of sodium thiosulfate

    Change it by mixing different volumes of thiosulfate and water.

  2. What is the dependent variable?

    Show answer

    The time for the cross to disappear

    The shorter the time, the faster the rate.

  3. Why should the same person watch the same cross every time?

    Show answer

    People judge “disappeared” differently, so this keeps it fair

    It reduces errors from judging the end point.

Remember

  • Sodium thiosulfate + hydrochloric acid gives a sulfur precipitate: the mixture goes cloudy.
  • Rate = 1000 ÷ time (or 1 ÷ time); rate is proportional to concentration.
  • Same total volume, same acid, same temperature, same cross and same observer.
  • Work in a ventilated room (sulfur dioxide).

Exam-style questions

  1. Sulfur dioxide gas is also made. What should you do?

    Show answer

    Work in a well-ventilated room; people with asthma should take care

    Sulfur dioxide is toxic and can trigger asthma.

  2. Why does raising the temperature increase the rate?

    Show answer

    Particles move faster, so they collide more often and more collisions have enough energy to react

    Both the frequency and the energy of collisions go up.

  3. Why is this method less precise than using a gas syringe?

    Show answer

    Judging when the cross disappears depends on the person

    A colour or cloudiness end point is subjective.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.