Species association and chi-squared
Required technique ST2 · 3.1 The living environment · Spec 3.1.3, MS 1.9
Aim: Record whether heather and bracken are present in random quadrats on a moor, and use a chi-squared test to see if they are associated.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- 1 m² quadrat: Record whether each species is present in it.
- Two tape measures: Make a grid for random coordinates.
- Random number generator: Gives random coordinates, so there is no bias.
- Plant identification key: To be sure of each species.
- Recording sheet: Tick present or absent for each species.
Method
Show the method
- Lay out two tape measures at right angles to make a grid on the moor.
- Use random numbers to choose coordinates.
- Place the quadrat at the coordinates.
- Record whether heather and whether bracken is present in the quadrat.
- Repeat for 40 quadrats.
- Put the results in a 2 × 2 table and carry out a chi-squared test for association.
The variables
What does % frequency of a species mean?
Show answer
The % of quadrats in which the species is present
Frequency is quick to record but does not show how much of the species there is.
Why is a chi-squared test for association used?
Show answer
The data are counts in categories (present/absent for two species)
It tests whether two species occur together more or less often than chance.
Why must the quadrats be random?
Show answer
So the sample is not biased towards places where the species do or do not grow together
Random sampling (Me1) gives a representative sample.
Remember
- Frequency (ST2) = % of quadrats (or grid squares) where the species is present.
- Chi-squared for association: 2 × 2 table; E = row total × column total ÷ grand total; χ² = Σ (O − E)²/E.
- df = (rows − 1)(columns − 1); critical value 3.841 for df = 1 at p = 0.05.
- Fewer together than expected = negative association (eg competition); more = positive association.
Exam-style questions
What does % frequency NOT tell you?
Show answer
How much of the species there is in each quadrat
Use % cover or density for abundance.
How is degrees of freedom found for a contingency table?
Show answer
(rows − 1) × (columns − 1)
For a 2 × 2 table: 1 × 1 = 1.
A grid quadrat has 100 squares. A species is in 34 of them. What is its local frequency?
Show answer
34%
Grid quadrats (ST2) give frequency or % cover within one quadrat.
Play next
- 🧪 Next: Soil water, organic matter and bulk densityRequired technique ST3. Measure the water content, organic matter content and bulk density of soil cores from a wood and an arable field.
- 🧪 Previous: Bat detector and chi-squaredRequired technique ST5. Use a bat detector to count bat passes along a path with lit and dark sections, and test whether bats are spread evenly with a chi-squared test.
- 🧪 All AQA A-level Environmental Science practicalsPractise every sampling technique (ST1 to ST6) and the statistics: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🏝️ KN Island: revision gameRun an island for 12 years (14 in Examiner mode): every choice is real Environmental Science.
- 🔗 Associations: AQA revision gameLink eight key terms on a board and say why each pair goes together.
- 5️⃣ Five Degrees: AQA revision gameGet from one term to another in five steps or fewer, with a link that makes sense at every step.
- 🗂️ AQA A-level Environmental Science revisionEvery topic, with questions and answers, quizzes and crosswords.
