Waves in a ripple tank
Required practical 8 · 4.6 Waves · Spec 4.6.1.2
Aim: Measure the wavelength and frequency of water waves and use them to find the wave speed.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Ripple tank: A shallow tray of water with a vibrating bar that makes the waves.
- Signal generator: Sets the frequency of the vibrating bar.
- Lamp: Shines through the water so the waves cast shadows on paper below.
- Ruler: Measures across several wavelengths on the shadow pattern.
Method
Show the method
- Fill the ripple tank with water to a depth of about 5 mm.
- Set up the lamp above the tank so the waves cast shadows on paper below.
- Switch on the signal generator and set the frequency.
- Measure the length across 10 waves on the paper and divide by 10 to get the wavelength.
- Change the frequency and repeat.
- Calculate the wave speed using v = f × λ.
The variables
What is the independent variable?
Show answer
The frequency
You set the frequency on the signal generator.
What is the dependent variable?
Show answer
The wavelength
You measure the wavelength at each frequency.
Which of these is a control variable?
Show answer
The depth of the water
Waves travel at different speeds in different depths.
Remember
- v = f × λ. Frequency from the signal generator; wavelength from the length of several waves ÷ the number of waves.
- Measure across many waves (or a photo with a ruler) to reduce uncertainty.
- For waves on a string: measure several half-wavelengths (loops) with a metre rule; frequency from the signal generator.
- Hazards: water and electricity; strobe lights can trigger epilepsy.
Exam-style questions
How could you freeze the wave pattern to measure it more easily?
Show answer
Take a photo, or use a strobe light at the same frequency
A photo with a ruler in it can be measured carefully afterwards.
In the waves on a string version, how do you find the wavelength?
Show answer
Measure the length of several half-wavelengths (loops) and work out one whole wave
Each loop is half a wavelength.
What is a hazard with the ripple tank?
Show answer
Water near an electrical supply: mop up spills
Keep water away from the signal generator and lamp.
Play next
- 🧪 Next: Reflection and refractionRequired practical 9. Investigate how light reflects off a mirror and refracts through glass and water.
- 🧪 Previous: Reaction timeExtra practical. Measure your reaction time with a falling ruler and see how a distraction changes it.
- 🧪 All AQA GCSE Physics practicalsDo all ten required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Physics revisionEvery topic, with questions and answers, quizzes and crosswords.
