Thermal insulation
Required practical 2 · 4.1 Energy · Spec 4.1.2.1
Aim: Compare how well different materials keep a beaker of hot water warm.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Beakers: One beaker for each material, all the same size.
- Kettle: Gives you hot water.
- Insulating materials: The materials you are comparing, such as bubble wrap, cotton wool and newspaper.
- Measuring cylinder: Puts the same volume of water in every beaker.
- Thermometer: Measures the water temperature.
- Stopwatch: Times the readings (every 2 minutes).
Method
Show the method
- Wrap each beaker in a different material, using the same thickness, and leave one beaker with no insulation.
- Boil water in a kettle.
- Use a measuring cylinder to pour the same volume of hot water into each beaker.
- Put a lid on each beaker and record the starting temperature.
- Start the stopwatch and record the temperature every 2 minutes for 10 minutes.
- Plot a cooling curve for each material and compare how far the temperature fell.
The variables
What is the independent variable?
Show answer
The insulating material
The material is what you change.
What is the dependent variable?
Show answer
The temperature of the water after each time
You measure the temperature to see how fast the water cools.
Which of these is a control variable?
Show answer
The volume and starting temperature of the water
The same volume and starting temperature in every beaker make it a fair test.
Remember
- Independent variable: the material. Dependent: temperature. Control: volume and starting temperature of the water, thickness of material, lid.
- Plot a cooling curve (temperature against time) for each material: the flatter curve is the better insulator.
- Good insulators have a low thermal conductivity. Thicker layers lower the rate of energy transfer.
- Hazard: hot water can scald. Pour carefully and keep beakers away from the bench edge.
Exam-style questions
Why is one beaker left with no insulation?
Show answer
It is a control, to compare the insulated beakers with
The control shows how much difference each material makes.
How would thicker walls affect the rate of cooling of a house?
Show answer
They lower the rate of energy transfer, so it cools more slowly
The thicker a wall, and the lower its thermal conductivity, the lower the rate of energy transfer.
Which change would make the results more accurate?
Show answer
Use a temperature probe and data logger so readings are taken at exactly the right times
A data logger removes reading errors and timing delays.
Play next
- 🧪 Next: Efficiency of a bouncing ballExtra practical. Find out what fraction of a ball’s gravitational potential energy is still there after one bounce.
- 🧪 Previous: Specific heat capacityRequired practical 1. Find the specific heat capacity of a metal block by heating it and measuring how fast its temperature rises.
- 🧪 All AQA GCSE Physics practicalsDo all ten required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Physics revisionEvery topic, with questions and answers, quizzes and crosswords.
