Infrared radiation
Required practical 10 · 4.6 Waves · Spec 4.6.2.2
Aim: Find out how the type of surface affects the infrared radiation it gives out (emits).
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Leslie cube: A metal cube with four different surfaces: matt black, shiny black, matt white and shiny silver.
- Kettle: Fills the cube with very hot water.
- Infrared detector: Measures the infrared radiation from each face.
- Ruler: Keeps the detector the same distance from each face.
Method
Show the method
- Put the Leslie cube on a heatproof mat.
- Fill the cube with very hot water from a kettle and put the lid on.
- Wait a minute so all the faces reach the same temperature.
- Put the infrared detector 10 cm from one face and record the reading.
- Repeat for each of the other three faces, at the same distance.
- Compare the readings for each surface.
The variables
What is the independent variable?
Show answer
The type of surface
You change which face the detector points at.
What is the dependent variable?
Show answer
The infrared radiation emitted (detector reading)
The detector measures it.
Which of these is a control variable?
Show answer
The distance from the face to the detector
The further away, the lower the reading.
Remember
- All objects emit and absorb infrared. The hotter the object, the more it emits.
- Matt black: best emitter and best absorber. Shiny silver (or white): poorest emitter and absorber, best reflector.
- Keep the distance to the detector the same; let all faces reach the same temperature.
- Categoric data (surfaces) goes in a bar chart.
Exam-style questions
Why must the detector be the same distance from each face?
Show answer
The reading gets lower the further away the detector is
Distance is a control variable.
Which surface would be best for a radiator to emit infrared?
Show answer
Matt black
Good emitters are dull and dark.
What is the main hazard and how do you control it?
Show answer
Very hot water: fill the cube carefully on a heatproof mat and do not touch it
Scalding is the risk. Do not move the cube while it is full.
Play next
- 🧪 Next: Speed of sound (echoes)Extra practical. Measure the speed of sound in air by timing echoes from a wall.
- 🧪 Previous: Reflection and refractionRequired practical 9. Investigate how light reflects off a mirror and refracts through glass and water.
- 🧪 All AQA GCSE Physics practicalsDo all ten required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Physics revisionEvery topic, with questions and answers, quizzes and crosswords.
