AQA GCSE Chemistry · Virtual Lab

Water purification

Required practical 8 · 4.10 Using resources · Spec 4.10.1.2
Aim: Analyse water samples for pH and dissolved solids, and distil sea water to make pure water.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Universal indicator or pH meter: Measures the pH of each sample.
  • Evaporating basin: The water is evaporated in it, leaving any dissolved solids.
  • Balance: Weighs the basin before and after, to find the mass of solids.
  • Measuring cylinder: Measures 50 cm³ of each sample.
  • Bunsen burner, tripod and gauze: Heats the water to evaporate it.
  • Distillation apparatus: Flask, condenser and thermometer: boils sea water and condenses the steam.
  • Safety goggles: Protect your eyes from spitting hot water.

Method

Show the method
  1. Test the pH of each water sample with universal indicator or a pH meter.
  2. Weigh an empty evaporating basin.
  3. Add 50 cm³ of the sample and heat it until all the water has evaporated.
  4. Let the basin cool, then weigh it again to find the mass of dissolved solids.
  5. Distil some sea water: boil it in a flask and condense the steam in a condenser.
  6. Test the pH and dissolved solids of the distilled water you collected.

The variables

  1. What do you measure in the evaporation test?

    Show answer

    The mass of solid left behind

    Mass of solids = basin after − basin before.

  2. Why let the basin cool before weighing it?

    Show answer

    A hot basin gives a wrong reading on the balance

    Rising warm air affects the balance; it is also safer.

  3. How does distillation make pure water from sea water?

    Show answer

    Only the water boils off; the salts stay behind and the steam is condensed

    Water boils at 100 °C; the dissolved salts do not.

Remember

  • Potable water is safe to drink; it is not pure (it has dissolved substances).
  • Analysis: pH (indicator or meter); dissolved solids by evaporating a known volume and weighing.
  • Distillation: boil, condense the steam; salts stay behind. Pure water boils at 100 °C.
  • UK: filter beds, then sterilise with chlorine, ozone or UV.

Exam-style questions

  1. How is fresh water made potable in the UK?

    Show answer

    Filtering it, then sterilising it with chlorine, ozone or UV light

    Choose a fresh water source, pass it through filter beds, then sterilise.

  2. Why is distilling sea water not used much in the UK?

    Show answer

    It needs a lot of energy, so it is expensive

    Desalination is used where fresh water is scarce.

  3. How could you show the distilled water is pure?

    Show answer

    It boils at exactly 100 °C

    Pure substances melt and boil at fixed temperatures.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.