AQA GCSE Chemistry · Virtual Lab

Rusting

Extra practical · 4.10 Using resources · Spec 4.10.3.1
Aim: Find out which conditions iron nails need to rust, and how salt and a zinc coating change rusting.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Iron nails (one galvanised): The metal you test; the galvanised one is coated in zinc.
  • Test tubes with bungs: One for each condition; bungs keep air in or out.
  • Boiled water: Boiling removes dissolved air.
  • Oil: A layer on top stops air dissolving back into the boiled water.
  • Calcium chloride: Dries the air in tube C.
  • Balance: Weighs each nail before and after.

Method

Show the method
  1. Clean five iron nails with sandpaper and weigh each one.
  2. Boil some water to remove dissolved air and let it cool.
  3. Put a nail in each tube: tap water, boiled water, dry air with calcium chloride, salt water, and a galvanised nail in tap water.
  4. Pour a layer of oil onto the boiled water and put bungs in the tubes that must be sealed.
  5. Leave the tubes for a week.
  6. Take the nails out, dry them, look for rust and weigh them again.

The variables

  1. What is the independent variable?

    Show answer

    The conditions round the nail

    Water, air, salt and zinc are changed.

  2. What is the dependent variable?

    Show answer

    How much rust forms (the gain in mass)

    Rust adds oxygen and water to the iron, so the mass goes up.

  3. Why boil the water for tube B?

    Show answer

    To remove dissolved air (oxygen)

    Then the nail has water but no oxygen.

Remember

  • Iron needs both water and oxygen to rust; salt speeds it up.
  • Rust is hydrated iron(III) oxide; rusting is a type of corrosion.
  • Barrier methods: paint, oil, grease, plastic, electroplating.
  • Sacrificial protection: a more reactive metal (zinc, magnesium) corrodes instead. Galvanising coats iron with zinc.
  • % increase in mass = (after − before) ÷ before × 100.

Exam-style questions

  1. Which of these is a barrier method of stopping rust?

    Show answer

    Painting

    Paint, oil, grease and plastic keep out air and water.

  2. What is rust?

    Show answer

    Hydrated iron(III) oxide

    Iron + oxygen + water → hydrated iron(III) oxide.

  3. Why do cars rust faster where roads are gritted with salt in winter?

    Show answer

    Salt water speeds up rusting

    Tube D (salt water) rusted most.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.