Neutralisation (titration)
Required practical 2 · 4.4 Chemical changes · Spec 4.4.2.5
Aim: Find the volume of hydrochloric acid that neutralises 25.0 cm³ of sodium hydroxide solution, and work out the concentration of the sodium hydroxide.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Burette and clamp stand: Adds the acid and measures its volume to 0.05 cm³.
- Pipette (25.0 cm³) and filler: Measures exactly 25.0 cm³ of the alkali.
- Conical flask: Holds the alkali; you can swirl it without spilling.
- Indicator (phenolphthalein): Changes colour at the end point.
- White tile: Makes the colour change easy to see.
- Small funnel: Fill the burette safely (take it out before you start).
- Safety goggles: Sodium hydroxide is corrosive to eyes.
Method
Show the method
- Rinse the burette with the acid, fill it using a funnel and record the starting volume.
- Use a pipette and filler to put 25.0 cm³ of sodium hydroxide solution into a conical flask.
- Add a few drops of indicator and stand the flask on a white tile.
- Add acid from the burette while swirling, then drop by drop, until the indicator just changes colour.
- Record the final burette reading; the titre is the final reading minus the start reading.
- Repeat until you have concordant titres (within 0.10 cm³ of each other).
The variables
Why stand the flask on a white tile?
Show answer
To see the colour change clearly
The end point is the first permanent colour change.
Why swirl the flask?
Show answer
To mix the acid and alkali so they react fully
Otherwise the colour may change in one spot too early.
What are concordant titres?
Show answer
Titres within 0.10 cm³ of each other
Use only concordant titres to work out the mean.
Remember
- Pipette 25.0 cm³ of alkali into a conical flask, add indicator, put it on a white tile.
- Add acid from the burette, swirling; drop by drop near the end point.
- Titre = final − initial reading. Repeat until concordant (within 0.10 cm³); mean the concordant titres.
- Moles = concentration × volume (dm³). Concentration = moles ÷ volume (dm³).
- Use the balanced equation for the mole ratio.
Exam-style questions
Why is the rough titration left out of the mean?
Show answer
It usually overshoots the end point
The rough titration shows roughly where the end point is.
25.0 cm³ of 0.10 mol/dm³ NaOH reacts with sulfuric acid: H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O. How many moles of H₂SO₄ reacted? (Higher)
Show answer
0.00125 mol
Moles NaOH = 0.10 × 0.025 = 0.0025. The ratio is 1 : 2, so 0.0025 ÷ 2 = 0.00125 mol.
Methyl orange is yellow in alkali. What colour is it in acid?
Show answer
Red
Phenolphthalein is pink in alkali and colourless in acid.
Play next
- 🧪 Next: ElectrolysisRequired practical 3. Electrolyse solutions with inert electrodes and identify the product at each electrode.
- 🧪 Previous: Making saltsRequired practical 1. Make pure, dry crystals of copper sulfate from insoluble copper oxide and dilute sulfuric acid.
- 🧪 All AQA GCSE Chemistry practicalsDo all eight required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Chemistry revisionEvery topic, with questions and answers, quizzes and crosswords.
