Making salts
Required practical 1 · 4.4 Chemical changes · Spec 4.4.2.3
Aim: Make pure, dry crystals of copper sulfate from insoluble copper oxide and dilute sulfuric acid.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Beaker and glass rod: The acid and copper oxide react in the beaker; stir with the rod.
- Measuring cylinder: Measures 25 cm³ of acid.
- Dilute sulfuric acid: Reacts with the copper oxide to make copper sulfate.
- Spatula and copper oxide: Add the black copper oxide a little at a time.
- Bunsen burner, tripod and gauze: Warms the acid and heats the water bath.
- Filter funnel and paper: Removes the excess copper oxide.
- Evaporating basin: Holds the solution while water evaporates.
- Safety goggles: Protect your eyes from hot acid.
Method
Show the method
- Measure 25 cm³ of dilute sulfuric acid into a beaker and warm it gently (do not boil it).
- Add copper oxide a spatula at a time, stirring, until some black solid stays undissolved.
- Filter the mixture to remove the excess copper oxide.
- Pour the blue filtrate into an evaporating basin and heat it over a water bath until crystals start to form.
- Leave it in a warm place to cool and crystallise.
- Pat the crystals dry with filter paper and weigh them.
The variables
Why add copper oxide until some is left over (in excess)?
Show answer
So that all the acid reacts and is used up
Then the salt solution has no acid left in it.
Why warm the acid?
Show answer
To speed up the reaction
Do not boil it: hot acid can spit.
Why filter the mixture?
Show answer
To remove the excess copper oxide that did not react
The copper sulfate is dissolved, so it goes through the paper (the filtrate).
Remember
- Insoluble base (metal oxide, hydroxide or carbonate) + acid → salt + water (+ CO₂ for carbonates).
- Add the base in excess so all the acid reacts; warm to speed it up.
- Filter off the excess, heat the filtrate over a water bath until crystals start to form, then leave it to crystallise.
- Pat the crystals dry. % yield = actual ÷ theoretical × 100.
- Moles = concentration × volume in dm³ (cm³ ÷ 1000).
Exam-style questions
Which salt is made from zinc oxide and hydrochloric acid?
Show answer
Zinc chloride
Hydrochloric acid makes chlorides, sulfuric makes sulfates, nitric makes nitrates.
Why heat the solution over a water bath instead of boiling it dry?
Show answer
Gentle heating lets crystals form; boiling dry gives a powder and can spoil the salt
Water of crystallisation is lost if hydrated crystals are overheated.
Which is the word equation?
Show answer
copper oxide + sulfuric acid → copper sulfate + water
Metal oxide + acid → salt + water.
Play next
- 🧪 Next: Neutralisation (titration)Required practical 2. Find the volume of hydrochloric acid that neutralises 25.0 cm³ of sodium hydroxide solution, and work out the concentration of the sodium hydroxide.
- 🧪 Previous: Burning magnesium: mass changeExtra practical. Heat magnesium in a crucible, measure the gain in mass, and use your results to work out the formula of magnesium oxide.
- 🧪 All AQA GCSE Chemistry practicalsDo all eight required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Chemistry revisionEvery topic, with questions and answers, quizzes and crosswords.
