Till fabric analysis
Extra practical · T3 Quaternary geology (option) · Spec T3.2
Aim: Measure the long-axis directions of pebbles in glacial till to find which way the ice was moving.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Compass: Measures the bearing of each pebble’s long axis.
- Trowel: Cleans a fresh face of till.
- Ruler: Checks each pebble is at least twice as long as it is wide.
- Field notebook: Records the bearings.
Method
Show the method
- Clean a fresh face of the till with a trowel.
- Choose elongated pebbles that are at least twice as long as they are wide.
- Measure the compass bearing of each pebble’s long axis without moving it.
- Measure many pebbles from one small area.
- Group the bearings into 30° classes and draw a rose diagram.
- The main direction of the long axes shows the line of ice movement.
Planning questions
Why use only elongated pebbles?
Show answer
Only they have a clear long axis to measure
A round pebble has no direction to measure.
Why measure pebbles from one small area?
Show answer
Ice flow can change from place to place, so one sample should come from one spot
Mixing areas could blur the direction.
Why measure many pebbles, not a few?
Show answer
Some pebbles lie at random, so many are needed for a clear main direction
A larger sample shows the pattern despite random ones.
Remember
- Till fabric: measure the long-axis bearing (0–180°) of many elongated clasts from one fresh face.
- Group into 30° classes and draw a rose diagram; the main direction is parallel to ice flow.
- Fabric gives a line of flow; erratics, striations and clast plunge show the direction along it.
- Till: unsorted, unstratified, angular to sub-rounded clasts in clay. Outwash: sorted, stratified.
Exam-style questions
Why do pebbles in lodgement till line up parallel to ice flow?
Show answer
The moving ice drags and rotates them into the most stable direction as they are smeared onto the bed
Shear at the base of the glacier aligns elongated clasts.
How does till differ from outwash sand and gravel?
Show answer
Till is unsorted and unstratified; outwash is sorted and layered by meltwater
Ice dumps everything together; water sorts it.
Which feature also shows ice direction on bedrock?
Show answer
Striations
Rocks dragged in the ice scratch the bed parallel to flow.
Play next
- 🧪 Next: Palaeomagnetism and Britain’s driftExtra practical. Use the magnetic inclination in British rocks of different ages to work out Britain’s palaeolatitude and track its drift north.
- 🧪 Previous: Strike lines and a boreholeExtra practical. Draw strike lines for a coal seam on a geological map, work out its dip, and find how deep it is below a proposed borehole.
- 🧪 All Eduqas A-level Geology practicalsDo all 20 specified practicals (SP1 to SP20), plus extra ones for the other topics: kit, method, results and exam questions.
- ❓ Ten question quiz: Eduqas revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: Eduqas revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: Eduqas revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ Eduqas A-level Geology revisionEvery topic, with questions and answers, quizzes and crosswords.
