Six-figure grid references
Specified practical 13 · F2 Surface and internal processes of the rock cycle · Spec F2.3b
Aim: Find geological features in the field and record their six-figure grid references on a map.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Topographic map: An Ordnance Survey style map with 1 km grid squares.
- Compass: Orientates the map so it lines up with the ground.
- Romer: A small scale that divides a grid square into tenths.
- Pencil: Records the references in your notebook.
Method
Show the method
- Orientate the map with the compass so features on the map line up with the ground.
- Find the feature on the ground and the same place on the map.
- Read the easting: the vertical grid line to the left of the feature.
- Use the romer to measure the tenths across the square to the feature: this is the third figure.
- Read the northing: the horizontal line below the feature, then the tenths up the square.
- Write the six figures, eastings first then northings, beside a description of the feature.
Planning questions
Which comes first in a grid reference?
Show answer
The easting (along the bottom), then the northing (up the side)
“Along the corridor and up the stairs.”
On a map with 1 km squares, how precise is a six-figure reference?
Show answer
To 100 m
The third figure divides 1 km into tenths of 100 m.
Why use a romer rather than guessing the tenths?
Show answer
Measuring the tenths is more accurate than estimating by eye
An error of one tenth puts the feature 100 m out.
Remember
- Six figures: easting line + tenths across, then northing line + tenths up ("along the corridor, up the stairs").
- On 1 km squares, a six-figure reference is precise to 100 m; eight figures to 10 m.
- Use a romer to measure tenths. Orientate the map with a compass first.
- Distance between two points: find the east and north differences in metres and use Pythagoras.
Exam-style questions
How precise is an eight-figure grid reference on 1 km squares?
Show answer
To 10 m
Each extra pair of figures divides the square by ten again.
A student wrote 724356 for a point at easting 35.6, northing 72.4. What went wrong?
Show answer
The northing was written first
Eastings always come first: 356724.
Why give a grid reference and a description for each locality?
Show answer
So someone else can find and recognise the exact exposure
A reference finds the place; a description confirms the right feature.
Play next
- 🧪 Next: Scaled field sketchSpecified practical 14. Make a scaled, annotated field sketch of a faulted cliff exposure, using a metre rule as a scale object to measure features.
- 🧪 Previous: Plotting features on a base mapSpecified practical 12. Locate geological features in the field by compass bearing and pacing, then plot them on a 1:10 000 base map.
- 🧪 All Eduqas A-level Geology practicalsDo all 20 specified practicals (SP1 to SP20), plus extra ones for the other topics: kit, method, results and exam questions.
- ❓ Ten question quiz: Eduqas revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: Eduqas revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: Eduqas revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ Eduqas A-level Geology revisionEvery topic, with questions and answers, quizzes and crosswords.
