Eduqas A-level Geology · Virtual Lab

Sandstones in thin section

Specified practical 7 · F2 Surface and internal processes of the rock cycle · Spec F2.1e
Aim: Point count photomicrographs of sandstones to find the proportions of quartz, feldspar, rock fragments and matrix, then classify them.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Photo­micrographs: Pictures of thin sections in plane- and cross-polarised light, with a scale bar.
  • Point-counting grid: A clear overlay of evenly spaced points, so you do not choose which grains to count.
  • Classification chart: Names sandstones from their percentages of grains and matrix.
  • Calculator: Turns your tallies into percentages.

Method

Show the method
  1. Place the point-counting grid over the photomicrograph.
  2. At each grid point, identify what is under it: quartz, feldspar, a rock fragment or matrix.
  3. Tally each point, and count at least 100 points.
  4. Turn each tally into a percentage of the total.
  5. Use the percentages and the classification chart to name the sandstone.
  6. Describe the texture too: grain size from the scale bar, sorting and roundness.

Planning questions

  1. Why use a grid of points instead of choosing grains?

    Show answer

    It stops you picking the grains that are easy or interesting (bias)

    Evenly spaced points sample the rock fairly.

  2. Why count at least 100 points?

    Show answer

    More points give more reliable percentages

    With few points, one or two miscounts change the percentages a lot.

  3. How is feldspar told apart from quartz in thin section?

    Show answer

    Feldspar looks cloudy and may show cleavage or twinning; quartz is clear with no cleavage

    Weathering clouds feldspar; plagioclase shows stripes (twinning) in cross-polarised light.

Remember

  • Point counting: put a grid over the photomicrograph, identify what is under each point, count 100 or more, and convert to percentages.
  • Quartz: clear, no cleavage, first-order greys. Feldspar: cloudy, may show cleavage and twinning. Rock fragments: fine-grained pieces of older rock. Matrix: fine mud between grains.
  • Greywacke: 15% or more matrix. Arkose: 25% or more feldspar. Orthoquartzite: 90% or more quartz (scheme used here).
  • Composition and texture show maturity: long transport removes feldspar and mud and rounds the grains.

Exam-style questions

  1. Why does an arkose suggest fast erosion in a dry climate?

    Show answer

    Feldspar weathers to clay quickly in wet climates, so it survives only with little chemical weathering and short transport

    Feldspar is unstable at the surface; lots of it means it was buried before it could weather.

  2. A sandstone is 96% quartz with well-rounded grains. How would you describe its maturity?

    Show answer

    Mineralogically and texturally mature

    Only quartz is left and the grains are rounded: both kinds of maturity are high.

  3. In cross-polarised light, what shows a grain is plagioclase?

    Show answer

    Stripes of light and dark grey (multiple twinning)

    Lamellar (multiple) twinning is the key feature of plagioclase.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.