Metamorphic aureole simulation
Specified practical 20 · G1 Rock forming processes · Spec G1.2b
Aim: Model a metamorphic aureole: fill a small tin in a bed of sand with boiling water and measure how far and how fast the heat spreads.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Large tin of dry sand: The sand stands for the country rock around the intrusion.
- Small tin with lid: Holds the boiling water: the intrusion.
- Kettle: Boils the water (the magma).
- Thermometers: Placed in the sand at 2, 4, 6 and 8 cm from the small tin.
- Ruler: Places the thermometers at the right distances.
- Stopwatch: Times the readings, every 2 minutes.
Method
Show the method
- Put the small tin in the centre of the large tin and fill round it with dry sand.
- Push thermometers into the sand at 2, 4, 6 and 8 cm from the small tin, all 5 cm deep.
- Record the starting temperature of each thermometer.
- Pour boiling water into the small tin, put the lid on and start the stopwatch.
- Read every thermometer every 2 minutes.
- Plot temperature against time for each distance and find the highest temperature each one reached.
The variables
What is the independent variable?
Show answer
Distance from the small tin (the intrusion)
You placed thermometers at different distances.
What is the dependent variable?
Show answer
The temperature of the sand
You record temperatures to see how the heat spreads.
Which is a control variable?
Show answer
All thermometers at the same depth in the same dry sand
Depth and sand type are kept the same so only distance changes.
Remember
- Model: hot water (intrusion) in a tin, dry sand (country rock), thermometers at increasing distance, readings every 2 minutes.
- Further from the intrusion the temperature rise is smaller and the peak comes later.
- Real aureoles: grade falls outwards, eg hornfels → spotted rock (chiastolite) → unaltered mudstone.
- Larger intrusions give wider aureoles; circulating water narrows them. The model scales down temperature and time.
Exam-style questions
How would a larger intrusion change the aureole?
Show answer
It would be wider, because a large body holds more heat and cools more slowly
More heat over a longer time spreads further into the country rock.
Why might damp country rock give a narrower aureole than dry rock?
Show answer
Circulating water carries heat away
Moving fluids remove heat, so it does not spread as far by conduction.
Which rock forms right next to a large granite intruded into mudstone?
Show answer
Hornfels
The highest temperatures next to the contact recrystallise the mudstone into hard, fine hornfels.
Play next
- 🧪 Next: Measuring and classifying foldsExtra practical. Measure the dips of both limbs of folds in a quarry, work out the interlimb angle and classify each fold.
- 🧪 Previous: Earthquakes at a subduction zoneSpecified practical 19. Use earthquake data in Google Earth to plot focal depth against distance from a trench, then find the angle of the Benioff zone.
- 🧪 All Eduqas A-level Geology practicalsDo all 20 specified practicals (SP1 to SP20), plus extra ones for the other topics: kit, method, results and exam questions.
- ❓ Ten question quiz: Eduqas revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: Eduqas revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: Eduqas revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ Eduqas A-level Geology revisionEvery topic, with questions and answers, quizzes and crosswords.
