Measuring and classifying folds
Extra practical · G2 Rock deformation · Spec G2.1
Aim: Measure the dips of both limbs of folds in a quarry, work out the interlimb angle and classify each fold.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Compass-clinometer: Measures the dip and dip direction of each limb.
- Field notebook: Records the readings and a sketch of each fold.
- Hard hat: Protects you from falling rock in the quarry.
Method
Show the method
- Find the hinge of the fold and the limbs on each side.
- Measure the dip and dip direction of the left limb.
- Measure the dip and dip direction of the right limb.
- Repeat for each fold in the quarry.
- Work out the interlimb angle: 180° minus the sum of the two limb dips.
- Classify each fold by its interlimb angle, its symmetry and whether it is an anticline or a syncline.
The variables
What is measured on each limb?
Show answer
Its dip angle and dip direction
Both are needed: the dips give the interlimb angle, the directions show the fold type.
Why measure limbs on bedding planes in place?
Show answer
Loose blocks may have moved, so their dip means nothing
Only rock in place shows the fold’s real shape.
Why sketch each fold too?
Show answer
To record its shape and the direction you viewed it from
A sketch helps you interpret the numbers later.
Remember
- Measure dip and dip direction of both limbs on bedding in place.
- Interlimb angle (upright folds) = 180° − (dip 1 + dip 2). Gentle 120–180°, open 70–120°, close 30–70°, tight < 30°, isoclinal about 0°.
- Anticline: limbs dip away from the hinge, oldest beds in the core. Syncline: limbs dip towards the hinge, youngest in the core.
- Equal limb dips = symmetrical (vertical axial plane); unequal = asymmetrical (inclined axial plane).
Exam-style questions
What does a tight fold with an inclined axial plane suggest?
Show answer
Strong compression with the greatest stress at an angle
Tight folds need large shortening; inclined axial planes show asymmetric compression.
Where are the oldest beds in an anticline?
Show answer
In the core
Anticlines are arched up, so erosion exposes the oldest beds in the middle.
What is the axial plane of a fold?
Show answer
The plane joining the hinges of every folded bed
It divides the fold into its two limbs.
Play next
- 🧪 Next: Life or death assemblage?Extra practical. Measure and record bivalve shells in two beds to decide which is a life assemblage and which is a death assemblage.
- 🧪 Previous: Metamorphic aureole simulationSpecified practical 20. Model a metamorphic aureole: fill a small tin in a bed of sand with boiling water and measure how far and how fast the heat spreads.
- 🧪 All Eduqas A-level Geology practicalsDo all 20 specified practicals (SP1 to SP20), plus extra ones for the other topics: kit, method, results and exam questions.
- ❓ Ten question quiz: Eduqas revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: Eduqas revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: Eduqas revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ Eduqas A-level Geology revisionEvery topic, with questions and answers, quizzes and crosswords.
