Identifying unknown minerals
Specified practical 3 · F1 Elements, minerals and rocks · Spec F1.1e
Aim: Test unknown minerals and use a classification key to identify them.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Unknown minerals: Specimens labelled A to D: you have to work out what they are.
- Identification key: A key that splits minerals into groups using one property at a time.
- Hand lens: For lustre and cleavage.
- Streak plate: For the streak test.
- Steel nail: Hardness about 5.5: the key asks whether steel scratches the mineral.
- Dilute HCl: The key asks whether the mineral fizzes.
- Safety goggles: Protect your eyes from acid and chips of mineral.
Method
Show the method
- Put on safety goggles and choose a fresh surface on each unknown specimen.
- Start at the first question in the key: is the lustre metallic?
- Do the test the key asks for next, such as streak, hardness or acid.
- Follow the branch that matches your result to the next question.
- Keep going until the key gives a mineral name.
- Check the name against the data sheet using one more property, and record your evidence.
Planning questions
Why does a good key use properties you can test directly?
Show answer
So the result does not depend on guessing where the mineral came from
Observable properties give a clear yes or no at each step.
Why is colour a poor first question in a mineral key?
Show answer
Many minerals come in several colours, and impurities change colour
Quartz can be clear, white, pink or purple: colour on its own misleads.
Why check the answer with one more property at the end?
Show answer
A wrong result early in the key sends you down the wrong branch, so a check catches mistakes
A second, independent property confirms the identification.
Remember
- A key splits minerals using one observable property at a time, each with a clear yes or no.
- Good first questions: lustre (metallic or not), then streak, reaction with acid, hardness against steel, cleavage.
- Ore minerals: haematite (red-brown streak), galena (grey-black streak, cubic cleavage), pyrite (greenish-black streak, brass yellow).
- Always confirm the answer with one more property, and test fresh surfaces.
Exam-style questions
Two pale, non-metallic unknowns look alike. One fizzes in cold dilute HCl. Which is it most likely to be?
Show answer
Calcite
Calcite is a carbonate, so it gives off carbon dioxide with acid.
A dark mineral peels into thin flexible sheets. What is it?
Show answer
Biotite mica
One perfect basal cleavage lets micas split into sheets.
A weathered specimen gives results that do not fit any branch of the key. What should you do first?
Show answer
Test a fresh surface and repeat the tests
Weathering can change lustre and hardness, so retest a fresh surface.
Play next
- 🧪 Next: Scaled drawing of a rock specimenSpecified practical 4. Make a scaled, annotated drawing of a granite hand specimen, measuring crystal sizes with a ruler and hand lens.
- 🧪 Previous: Density of mineralsSpecified practical 2. Measure the density of minerals by finding their mass on a balance and their volume by displacement of water.
- 🧪 All Eduqas A-level Geology practicalsDo all 20 specified practicals (SP1 to SP20), plus extra ones for the other topics: kit, method, results and exam questions.
- ❓ Ten question quiz: Eduqas revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: Eduqas revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: Eduqas revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ Eduqas A-level Geology revisionEvery topic, with questions and answers, quizzes and crosswords.
