Eduqas A-level Geology · Virtual Lab

Diagnostic properties of minerals

Specified practical 1 · F1 Elements, minerals and rocks · Spec F1.1e
Aim: Test known minerals for colour, lustre, streak, hardness, cleavage and reaction with acid, and record the results.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Mineral specimens: Labelled specimens of the minerals you are testing.
  • Hand lens: A ×10 lens shows lustre, cleavage planes and small crystal faces.
  • Streak plate: An unglazed white tile: rubbing the mineral on it shows the colour of its powder.
  • Copper coin: Hardness about 3.5 on Mohs’ scale, used in the scratch test.
  • Steel nail: Hardness about 5.5, used in the scratch test.
  • Dilute HCl: Cold dilute hydrochloric acid in a dropper bottle: carbonates such as calcite fizz.
  • Safety goggles: Protect your eyes from acid and from chips of mineral.

Method

Show the method
  1. Put on safety goggles and find a fresh, unweathered surface on each specimen.
  2. Record the colour and lustre, looking at the specimen with a hand lens.
  3. Rub the mineral on an unglazed streak plate and record the colour of the powder.
  4. Try to scratch the mineral with a fingernail, a copper coin and a steel nail, and wipe the mark to check it is a real groove.
  5. Look for flat cleavage planes, or curved and uneven fracture surfaces, with the hand lens.
  6. Add one drop of cold dilute hydrochloric acid, watch for fizzing, then rinse the specimen.
  7. Record every result in a table and compare it with the mineral data sheet.

Planning questions

  1. Why test a fresh surface?

    Show answer

    Weathering and tarnish can change the colour and lustre

    A weathered surface can be stained or tarnished, so it can give the wrong colour and lustre.

  2. Why is streak more reliable than colour?

    Show answer

    The colour of the powder stays the same even when impurities change the colour of the specimen

    Impurities and tarnish change surface colour, but the powder colour of a mineral is constant.

  3. A mineral is scratched by a steel nail but not by a copper coin. What is its hardness?

    Show answer

    Between 3.5 and 5.5

    The coin is about 3.5 and steel about 5.5, so the mineral lies between them.

Remember

  • Diagnostic properties: colour, lustre, streak, hardness, cleavage or fracture, crystal shape, reaction with acid, density.
  • Mohs’ scale: fingernail about 2.5, copper coin about 3.5, steel nail or glass about 5.5, quartz 7.
  • Streak (powder colour on an unglazed tile) is more reliable than colour: haematite red-brown, galena grey-black, pyrite greenish-black.
  • Cleavage: flat planes of weakness in the crystal structure (calcite 3 not at 90°, galena 3 at 90°, orthoclase 2 at 90°, micas 1). Quartz has conchoidal fracture.
  • Calcite fizzes in cold dilute HCl. Wear goggles and rinse the specimen.

Exam-style questions

  1. Why is the acid test done last on a specimen?

    Show answer

    Acid can etch and stain the surface and spoil the other tests

    Do the tests that need a clean surface first, then the acid test, then rinse the specimen.

  2. A colourless mineral has cubic cleavage, a hardness of about 2.5 and does not react with acid. What is it?

    Show answer

    Halite

    Calcite fizzes and has rhombic cleavage; quartz is hardness 7 with no cleavage.

  3. Why should you use at least two properties to identify a mineral?

    Show answer

    Many minerals share a colour or lustre, so one property alone is not enough

    Combining properties such as hardness, cleavage and streak makes the identification secure.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.