AQA A-level Environmental Science · Virtual Lab

Water quality and a farm drain

Required technique ST1 · 3.4 Pollution · Spec 3.4.3.2, Me6
Aim: Measure phosphate, turbidity and dissolved oxygen above and below a farm drain, and use standard deviations to judge whether the differences are real.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Phosphate test kit: A reagent turns blue in proportion to phosphate; compare with a colour chart or colorimeter.
  • Turbidity meter: Measures how cloudy the water is (NTU).
  • Dissolved oxygen meter: Measures the oxygen dissolved in the water (mg/dm³).
  • Sample bottles: Collect water samples without air bubbles.
  • Waders: For safe sampling in the stream.

Method

Show the method
  1. Choose a site 50 m above the drain and one 50 m below it, in similar flow.
  2. Collect each sample from mid-stream, facing upstream, without trapping air.
  3. Measure dissolved oxygen straight away, at the site.
  4. Measure turbidity and phosphate concentration.
  5. Take 5 samples at each site on the same day.
  6. Calculate the mean and standard deviation for each site and compare them.

The variables

  1. Why measure dissolved oxygen at the site, straight away?

    Show answer

    It changes quickly as the sample warms or mixes with air

    Temperature and air contact change dissolved oxygen.

  2. Why take 5 samples at each site?

    Show answer

    To calculate a mean and standard deviation, so you can judge the variability

    One sample could be unusual.

  3. Why choose sites with similar flow?

    Show answer

    Flow affects turbidity and oxygen, so it would be a confounding variable

    Only the position relative to the drain should differ.

Remember

  • ST1 water: phosphate and nitrate (test kits or colorimeter), turbidity (meter, tube or Secchi disc), pH, dissolved oxygen.
  • Measure oxygen at the site; avoid air bubbles; similar flow at both sites.
  • Me6: standard deviation; if mean ± 1 SD ranges overlap, the difference may not be significant.
  • Fertiliser runoff → eutrophication → algal bloom → decomposition → low oxygen.

Exam-style questions

  1. Why is phosphate usually the limiting nutrient in fresh water?

    Show answer

    It is in short supply naturally, so adding a little causes rapid algal growth

    Phosphate binds to soil, so less leaches than nitrate, except with eroded soil.

  2. How does high turbidity harm a stream ecosystem?

    Show answer

    It reduces light for photosynthesis and silt smothers gravel used by fish eggs

    Turbidity is measured with a meter, a turbidity tube or (in deep water) a Secchi disc.

  3. Give one farming method that reduces nutrient runoff.

    Show answer

    Leave buffer strips of vegetation beside streams

    Also apply fertiliser only when crops need it.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.