Biochemical oxygen demand (BOD)
Extra practical · 3.4 Pollution · Spec 3.4.3.2
Aim: Measure the BOD of river water at different distances below a sewage works to show how organic pollution and recovery change along a river.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Dark glass BOD bottles: Filled to the top and kept in the dark so no oxygen is made by photosynthesis.
- Dissolved oxygen meter: Measures the oxygen in the water on day 0 and day 5.
- Incubator at 20 °C: Keeps every sample at the same temperature for 5 days.
- Sample bottles: Collect water from each site.
Method
Show the method
- Collect water from each site in two dark bottles, filled to the top with no air bubbles.
- Measure the dissolved oxygen in one bottle straight away (day 0).
- Seal the second bottle so no air can get in.
- Keep it in the dark at 20 °C for 5 days.
- Measure the dissolved oxygen in the second bottle (day 5).
- BOD = oxygen on day 0 − oxygen on day 5.
The variables
What does BOD measure?
Show answer
How much oxygen microorganisms use to break down organic matter in the water
High BOD = lots of organic pollution.
Why keep the bottles in the dark?
Show answer
To stop algae photosynthesising and adding oxygen
Then any fall in oxygen is from respiration by decomposers.
Why incubate at 20 °C?
Show answer
Temperature changes the rate of decomposition, so it must be the same for every sample
A standard method allows comparison.
Remember
- BOD = dissolved oxygen on day 0 − after 5 days in the dark at 20 °C (mg/dm³).
- Dark bottles, full with no air bubbles, sealed; same temperature for all samples.
- High BOD = much organic pollution; BOD falls downstream as decomposition and dilution clean the river.
- Sewage treatment uses microorganisms to cut BOD before discharge.
Exam-style questions
Which BOD shows clean river water?
Show answer
Under about 3 mg/dm³
Untreated sewage can have a BOD of several hundred mg/dm³.
Why does organic pollution lower oxygen in a river?
Show answer
Aerobic bacteria multiply and use oxygen to respire as they decompose it
The fall in oxygen kills sensitive animals such as stonefly nymphs and fish.
How does a sewage works reduce BOD before discharge?
Show answer
Bacteria in aerated tanks (activated sludge) or trickling filters break down the organic matter
Primary settling removes solids; secondary treatment uses microorganisms.
Play next
- 🧪 Next: Phosphate and algal growthExtra practical. Grow algae with different phosphate concentrations and measure growth with a colorimeter, to model eutrophication.
- 🧪 Previous: Water quality and a farm drainRequired technique ST1. Measure phosphate, turbidity and dissolved oxygen above and below a farm drain, and use standard deviations to judge whether the differences are real.
- 🧪 All AQA A-level Environmental Science practicalsPractise every sampling technique (ST1 to ST6) and the statistics: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🏝️ KN Island: revision gameRun an island for 12 years (14 in Examiner mode): every choice is real Environmental Science.
- 🔗 Associations: AQA revision gameLink eight key terms on a board and say why each pair goes together.
- 5️⃣ Five Degrees: AQA revision gameGet from one term to another in five steps or fewer, with a link that makes sense at every step.
- 🗂️ AQA A-level Environmental Science revisionEvery topic, with questions and answers, quizzes and crosswords.
