AQA A-level Environmental Science · Virtual Lab

Pitfall traps and the Lincoln index

Required technique ST4 · 3.1 The living environment · Spec 3.1.3, 3.7.2.1
Aim: Use pitfall traps and mark–release–recapture to estimate the population of a ground beetle species.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Pitfall traps (plastic cups): Sunk into the ground: beetles walking on the surface fall in.
  • Trowel: Digs a hole so the rim of each cup is level with the soil surface.
  • Covers raised on stones: Keep rain out and stop birds and mammals eating the catch.
  • Non-toxic paint pen: Puts a small mark on each beetle's back so recaptured ones can be recognised.
  • Identification key: So you count only the one species.

Method

Show the method
  1. Dig the traps in so each rim is level with the soil surface, and put a cover on stones over each one.
  2. Leave them overnight, then empty the traps and count the beetles of one species.
  3. Mark each beetle with a small dot of non-toxic paint on its back.
  4. Release the beetles where they were caught.
  5. Next night, empty the traps again and count all the beetles and the marked ones.
  6. Estimate the population with the Lincoln index.

The variables

  1. Why is the rim level with the soil surface?

    Show answer

    So beetles walking on the surface fall in and cannot climb out

    A raised rim acts as a barrier and the beetles walk round it.

  2. Why must the paint mark be small and non-toxic?

    Show answer

    So it does not harm the beetle or make it easier for predators to see

    Otherwise marked beetles might be eaten more, so fewer are recaptured.

  3. Why leave a night before recapturing?

    Show answer

    So the marked beetles can mix back evenly into the population

    Even mixing is an assumption of the Lincoln index.

Remember

  • Pitfall trap (ST4): cup sunk level with the soil surface, cover on stones; empty daily.
  • Lincoln index: population = (n₁ × n₂) ÷ m₂ (n₁ marked first, n₂ caught second, m₂ marked in the second catch).
  • Assumptions: closed population (no births, deaths or migration), marks not lost, no effect on survival, even mixing.
  • Repeat and take a mean: small recapture numbers give large sampling error.

Exam-style questions

  1. Which is an assumption of the Lincoln index?

    Show answer

    No births, deaths, immigration or emigration between the samples

    Also: marks are not lost and marked animals mix evenly.

  2. A beetle population estimate is too high. Which could explain it?

    Show answer

    Some marks rubbed off, so fewer marked beetles were counted on recapture

    Fewer recognised recaptures (smaller m₂) makes n₁ × n₂ ÷ m₂ bigger.

  3. Why are pitfall traps checked every morning?

    Show answer

    So predators in the trap do not eat the catch and animals do not die

    Leaving traps unchecked is unethical and biases the results.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.