AQA GCSE Combined Science: Trilogy · Virtual Lab

Thermal insulation

Extra practical · 6.1 Physics: Energy · Spec 6.1.2.1
Aim: Compare how well different materials keep a beaker of hot water warm.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Beakers: One beaker for each material, all the same size.
  • Kettle: Gives you hot water.
  • Insulating materials: The materials you are comparing, such as bubble wrap, cotton wool and newspaper.
  • Measuring cylinder: Puts the same volume of water in every beaker.
  • Thermometer: Measures the water temperature.
  • Stopwatch: Times the readings (every 2 minutes).

Method

Show the method
  1. Wrap each beaker in a different material, using the same thickness, and leave one beaker with no insulation.
  2. Boil water in a kettle.
  3. Use a measuring cylinder to pour the same volume of hot water into each beaker.
  4. Put a lid on each beaker and record the starting temperature.
  5. Start the stopwatch and record the temperature every 2 minutes for 10 minutes.
  6. Plot a cooling curve for each material and compare how far the temperature fell.

The variables

  1. What is the independent variable?

    Show answer

    The insulating material

    The material is what you change.

  2. What is the dependent variable?

    Show answer

    The temperature of the water after each time

    You measure the temperature to see how fast the water cools.

  3. Which of these is a control variable?

    Show answer

    The volume and starting temperature of the water

    The same volume and starting temperature in every beaker make it a fair test.

Remember

  • Independent variable: the material. Dependent: temperature. Control: volume and starting temperature of the water, thickness of material, lid.
  • Plot a cooling curve (temperature against time) for each material: the flatter curve is the better insulator.
  • Good insulators have a low thermal conductivity. Thicker layers lower the rate of energy transfer.
  • Hazard: hot water can scald. Pour carefully and keep beakers away from the bench edge.

Exam-style questions

  1. Why is one beaker left with no insulation?

    Show answer

    It is a control, to compare the insulated beakers with

    The control shows how much difference each material makes.

  2. How would thicker walls affect the rate of cooling of a house?

    Show answer

    They lower the rate of energy transfer, so it cools more slowly

    The thicker a wall, and the lower its thermal conductivity, the lower the rate of energy transfer.

  3. Which change would make the results more accurate?

    Show answer

    Use a temperature probe and data logger so readings are taken at exactly the right times

    A data logger removes reading errors and timing delays.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.