AQA GCSE Combined Science: Trilogy · Virtual Lab

Strength of an electromagnet

Extra practical · 6.7 Physics: Magnetism and electromagnetism · Spec 6.7.2.1
Aim: Find out how the number of turns of wire affects the strength of an electromagnet.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Iron nail: The iron core: it makes the magnetic field much stronger.
  • Insulated wire: Wrapped round the nail to make the coil.
  • Power supply: Drives a current through the coil.
  • Ammeter: Checks that the current stays the same.
  • Paper clips: Count how many the electromagnet picks up.

Method

Show the method
  1. Wrap 10 turns of insulated wire round the iron nail.
  2. Connect the coil to the power supply with an ammeter in series.
  3. Switch on and set the current to 1.0 A.
  4. Dip the nail into a pile of paper clips and count how many it picks up.
  5. Switch off, add 10 more turns, and repeat with the same current.
  6. Plot number of paper clips against number of turns.

The variables

  1. What is the independent variable?

    Show answer

    The number of turns

    You change the number of turns.

  2. What is the dependent variable?

    Show answer

    The number of paper clips picked up

    This shows the strength.

  3. Which of these is a control variable?

    Show answer

    The current

    More current would also make it stronger.

Remember

  • An electromagnet: a coil of wire (solenoid) carrying a current, usually with an iron core.
  • It gets stronger with more turns, more current or an iron core.
  • Keep the current the same (ammeter) while you change the number of turns.
  • Inside a solenoid the field is strong and uniform; outside it is like a bar magnet’s.

Exam-style questions

  1. Why is iron used for the core?

    Show answer

    It is easily magnetised and loses its magnetism when the current stops

    Iron is a soft magnetic material: it becomes an induced magnet.

  2. What is the hazard with a coil of wire carrying a large current?

    Show answer

    The wire gets hot and can burn you

    Keep the current low and switch off between readings.

  3. What does the magnetic field inside a long coil (solenoid) look like?

    Show answer

    Strong and uniform (parallel field lines)

    Inside a solenoid the field is strong and the same everywhere.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.