AQA GCSE Combined Science: Trilogy · Virtual Lab

Infrared radiation

Required practical 21 · 6.6 Physics: Waves · Spec 6.6.2.2
Aim: Find out how the type of surface affects the infrared radiation it gives out (emits).

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Leslie cube: A metal cube with four different surfaces: matt black, shiny black, matt white and shiny silver.
  • Kettle: Fills the cube with very hot water.
  • Infrared detector: Measures the infrared radiation from each face.
  • Ruler: Keeps the detector the same distance from each face.

Method

Show the method
  1. Put the Leslie cube on a heatproof mat.
  2. Fill the cube with very hot water from a kettle and put the lid on.
  3. Wait a minute so all the faces reach the same temperature.
  4. Put the infrared detector 10 cm from one face and record the reading.
  5. Repeat for each of the other three faces, at the same distance.
  6. Compare the readings for each surface.

The variables

  1. What is the independent variable?

    Show answer

    The type of surface

    You change which face the detector points at.

  2. What is the dependent variable?

    Show answer

    The infrared radiation emitted (detector reading)

    The detector measures it.

  3. Which of these is a control variable?

    Show answer

    The distance from the face to the detector

    The further away, the lower the reading.

Remember

  • All objects emit and absorb infrared. The hotter the object, the more it emits.
  • Matt black: best emitter and best absorber. Shiny silver (or white): poorest emitter and absorber, best reflector.
  • Keep the distance to the detector the same; let all faces reach the same temperature.
  • Categoric data (surfaces) goes in a bar chart.

Exam-style questions

  1. Why must the detector be the same distance from each face?

    Show answer

    The reading gets lower the further away the detector is

    Distance is a control variable.

  2. Which surface would be best for a radiator to emit infrared?

    Show answer

    Matt black

    Good emitters are dull and dark.

  3. What is the main hazard and how do you control it?

    Show answer

    Very hot water: fill the cube carefully on a heatproof mat and do not touch it

    Scalding is the risk. Do not move the cube while it is full.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.