AQA GCSE Combined Science: Trilogy · Virtual Lab

Force and acceleration

Required practical 19 · 6.5 Physics: Forces · Spec 6.5.4.2.2
Aim: Find out how the acceleration of a trolley depends on the force pulling it, with the mass kept the same.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Trolley and runway: The trolley you accelerate along a runway.
  • Pulley and string: Lets the weight of the hanging masses pull the trolley.
  • Slotted masses on a hanger: Their weight is the pulling force.
  • Light gates and data logger: Measure the trolley’s speed at two points and work out the acceleration.

Method

Show the method
  1. Set up the trolley on a runway with a pulley at the end and two light gates.
  2. Tilt the runway slightly so the trolley just keeps moving when pushed (this cancels friction).
  3. Put one mass on the hanger and the rest of the masses on the trolley.
  4. Release the trolley and record its acceleration from the light gates.
  5. Move one mass from the trolley to the hanger, so the total mass stays the same, and repeat.
  6. Plot acceleration against force.

The variables

  1. What is the independent variable?

    Show answer

    The force (weight on the hanger)

    You change the force by moving masses to the hanger.

  2. What is the dependent variable?

    Show answer

    The acceleration

    The light gates measure the acceleration.

  3. Which of these is a control variable?

    Show answer

    The total mass being accelerated

    Moving masses from the trolley to the hanger keeps the total mass the same.

Remember

  • Newton’s second law: F = m × a. Acceleration ∝ resultant force; acceleration ∝ 1 ÷ mass.
  • Keep the total mass constant by moving masses from the trolley to the hanger.
  • Light gates and a data logger time much better than a stopwatch.
  • Tilt the runway to compensate for friction. Put something soft under the hanging masses (hazard: falling masses).

Exam-style questions

  1. Why are the masses moved from the trolley to the hanger, rather than new masses added?

    Show answer

    To keep the total mass being accelerated the same

    The total mass includes the hanging masses, so it must stay the same for a fair test.

  2. Why tilt the runway slightly?

    Show answer

    To cancel out friction, so the resultant force is the weight on the hanger

    The tilt is just enough that the trolley rolls at a steady speed with no hanging mass.

  3. A 0.5 kg trolley is pulled by a resultant force of 1.5 N. What is its acceleration?

    Show answer

    3 m/s²

    a = F ÷ m = 1.5 ÷ 0.5 = 3 m/s².

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.