AQA GCSE Combined Science: Trilogy · Virtual Lab

Density

Required practical 17 · 6.3 Physics: Particle model of matter · Spec 6.3.1.1
Aim: Find the density of a regular solid, an irregular solid and a liquid.

Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.

Revise this practical

Equipment

Show the kit
  • Top-pan balance: Measures mass.
  • Ruler: Measures the sides of the regular solid.
  • Eureka can: Displacement can: the water pushed out by the stone equals the stone’s volume.
  • Measuring cylinder: Measures the volume of the liquid and of the water from the eureka can.

Method

Show the method
  1. Measure the mass of the cube, then measure its sides with a ruler and work out its volume.
  2. Measure the mass of the irregular stone.
  3. Fill a eureka can until water runs out of the spout, and put a measuring cylinder under the spout.
  4. Lower the stone in gently on a thread and measure the volume of water pushed out.
  5. Measure the mass of an empty measuring cylinder, add 50 cm³ of liquid and measure the mass again.
  6. Calculate each density using ρ = m ÷ V.

The variables

  1. To find the volume of the stone, what do you measure?

    Show answer

    The volume of water it pushes out of the eureka can

    An irregular object’s volume equals the volume of water it displaces.

  2. How do you find the mass of just the liquid?

    Show answer

    Mass of cylinder with liquid minus mass of the empty cylinder

    Subtracting the empty cylinder leaves the mass of the liquid. (You can also zero, or tare, the balance.)

  3. Why take three readings for each object?

    Show answer

    To spot any odd readings and find a mean

    Repeats make the result more precise and show up anomalies.

Remember

  • ρ = m ÷ V. Units: kg/m³ or g/cm³ (1 g/cm³ = 1000 kg/m³).
  • Regular solid: volume from length × width × height.
  • Irregular solid: volume of water displaced in a eureka can (or the rise in a measuring cylinder).
  • Liquid: mass of a known volume (zero the balance with the empty cylinder, or subtract its mass).
  • Read the meniscus at eye level; repeat and take means.

Exam-style questions

  1. Why lower the stone into the eureka can gently?

    Show answer

    So water does not splash out, which would make the volume too big

    Splashed water would be counted as displaced water.

  2. Why read the measuring cylinder at the bottom of the meniscus, at eye level?

    Show answer

    To read the volume accurately, avoiding parallax

    Reading from above or below gives the wrong value.

  3. A block has a mass of 540 g and a volume of 200 cm³. What is its density?

    Show answer

    2.7 g/cm³

    ρ = m ÷ V = 540 ÷ 200 = 2.7 g/cm³.

Play next

Share with your class

Teachers: send this page to your students. It is free and needs no sign-up.