Conductivity and bonding
Extra practical · 5.2 Chemistry: Bonding, structure and properties of matter · Spec 5.2.2
Aim: Test whether substances conduct electricity as solids and in water, and use the results to decide their bonding and structure.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Low-voltage power supply: Pushes a current round the circuit.
- Bulb: Lights up if the substance conducts.
- Two graphite electrodes and wires: Touch the solid, or dip into the liquid, to complete the circuit.
- Beaker of deionised water: Dissolve the substances in water with no ions in it.
- Spatula: Adds a little of each solid.
Method
Show the method
- Set up a circuit with the power supply, the bulb and two electrodes in series.
- Touch both electrodes onto the solid substance and see if the bulb lights.
- Rinse the electrodes with deionised water and dry them.
- Stir a spatula of the substance into deionised water in a beaker.
- Dip the electrodes into the beaker and see if the bulb lights.
- Repeat for each substance, rinsing the electrodes each time.
The variables
What is the independent variable?
Show answer
The substance being tested
You change the substance.
What is the dependent variable?
Show answer
Whether the substance conducts (the bulb lights)
An ammeter would show the current more clearly than a bulb.
Why use deionised water, not tap water?
Show answer
Tap water has dissolved ions, so it could conduct on its own
Otherwise you could not tell whether the substance made the water conduct.
Remember
- Ionic compounds conduct when melted or dissolved (ions free to move), not as solids.
- Metals and graphite conduct as solids (delocalised electrons).
- Simple molecular substances (sugar, wax) do not conduct; weak intermolecular forces give low melting points.
- Giant covalent substances (sand, diamond) have very high melting points and (apart from graphite) do not conduct.
- Use deionised water and rinse the electrodes between tests.
Exam-style questions
Why do metals such as copper conduct electricity?
Show answer
They have delocalised electrons that move through the structure
Metallic bonding: positive ions in a sea of delocalised electrons.
Sugar dissolves but the solution does not conduct. What does that tell you?
Show answer
Sugar is made of small covalent molecules, with no ions
Molecules have no overall charge, so they carry no current.
Why does candle wax melt at a low temperature?
Show answer
The forces between its molecules are weak
Melting breaks the intermolecular forces, not the covalent bonds.
Play next
- 🧪 Next: Burning magnesium: mass changeExtra practical. Heat magnesium in a crucible, measure the gain in mass, and use your results to work out the formula of magnesium oxide.
- 🧪 Previous: Halogen displacementExtra practical. Add each halogen to solutions of the other halides to find the order of reactivity in group 7.
- 🧪 All AQA GCSE Combined Science: Trilogy practicalsDo all 21 Trilogy required practicals, plus extra ones for most topics: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Combined Science: Trilogy revisionEvery topic, with questions and answers, quizzes and crosswords.
