Temperature changes
Required practical 4 · 4.5 Energy changes · Spec 4.5.1.1
Aim: Find how the volume of sodium hydroxide added to hydrochloric acid affects the highest temperature, and find the volume needed to neutralise the acid.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Polystyrene cup and lid: A good insulator, so less energy is lost to the surroundings.
- Beaker: Stands the cup in, so it cannot fall over.
- Measuring cylinders: Measure the acid and each 5 cm³ of alkali.
- Thermometer: Measures the highest temperature after each addition.
- Safety goggles: Acids and alkalis harm eyes.
Method
Show the method
- Measure 30 cm³ of dilute hydrochloric acid into a polystyrene cup standing in a beaker.
- Record the starting temperature of the acid.
- Add 5 cm³ of sodium hydroxide solution, put the lid on and stir.
- Record the highest temperature reached.
- Add another 5 cm³, stir, and record the highest temperature again.
- Carry on until 40 cm³ has been added, then plot temperature against volume.
The variables
What is the independent variable?
Show answer
The volume of sodium hydroxide added
You add it 5 cm³ at a time.
What is the dependent variable?
Show answer
The highest temperature
Record the highest reading after each addition.
Why use a polystyrene cup with a lid?
Show answer
It reduces energy lost to the surroundings
Polystyrene is a good insulator; the lid stops losses from the top.
Remember
- Exothermic: gives out energy, temperature rises (neutralisation, combustion).
- Endothermic: takes in energy, temperature falls (thermal decomposition, citric acid + sodium hydrogencarbonate).
- Polystyrene cup with a lid in a beaker cuts energy losses; stir and read the highest temperature.
- The peak on the graph shows the volume needed for neutralisation.
Exam-style questions
After the peak, why does the temperature fall as more alkali is added?
Show answer
No more reaction happens, and the cooler alkali cools the mixture
Once all the acid is used, the extra alkali just takes in energy.
Which of these is endothermic?
Show answer
Thermal decomposition
Endothermic reactions take in energy, so the temperature falls (or heat must be supplied).
On a reaction profile for an exothermic reaction, the products are…
Show answer
lower in energy than the reactants
The difference is the energy given out.
Play next
- 🧪 Next: Rates of reaction: gas volumeRequired practical 5. Find out how the concentration of hydrochloric acid affects the rate of its reaction with magnesium, by measuring the volume of hydrogen made.
- 🧪 Previous: ElectrolysisRequired practical 3. Electrolyse solutions with inert electrodes and identify the product at each electrode.
- 🧪 All AQA GCSE Chemistry practicalsDo all eight required practicals, plus extra ones for each topic: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🗂️ AQA GCSE Chemistry revisionEvery topic, with questions and answers, quizzes and crosswords.
