Traffic noise and distance
Extra practical · 3.4 Pollution · Spec 3.4.3.2.13
Aim: Measure traffic noise at different distances from a busy road with a sound level meter, and use the decibel scale.
Do it in the virtual lab: choose the kit, plan the method, take your own readings, then use your results and answer exam questions. Every run gives new readings.
Revise this practical
Equipment
Show the kit
- Sound level meter (dB(A)): Measures sound level in decibels, weighted for human hearing.
- Tape measure: Measures the distance from the edge of the road.
- Stopwatch: Each reading is an average over the same time (1 minute).
- Recording sheet: Record the level at each distance.
Method
Show the method
- Lay a tape measure at right angles to the road, across open ground.
- Hold the meter at 1.5 m height, pointing at the road, away from your body.
- Record the average sound level over 1 minute at the first distance.
- Repeat at each distance, doubling the distance each time.
- Count the vehicles passing during each minute, to check the traffic was similar.
- Plot sound level against distance and work out the fall per doubling.
The variables
Why use the dB(A) setting?
Show answer
It weights the reading to match how human ears respond
A-weighting reduces very low and very high frequencies.
Why count the vehicles in each minute?
Show answer
Traffic flow changes noise, so it must be similar for each reading
Otherwise traffic would be a confounding variable.
Why average over 1 minute?
Show answer
Noise changes from moment to moment as vehicles pass
Leq is the average level over a period.
Remember
- Sound level meter on dB(A), 1.5 m high, 1-minute average (Leq); check traffic flow is similar.
- Decibel scale is logarithmic: intensity ratio = 10^(ΔdB ÷ 10); +10 dB ≈ twice as loud.
- Noise falls with distance (about 3–6 dB per doubling), more over soft ground and behind barriers.
- Control: barriers, quieter surfaces, speed limits, insulation.
Exam-style questions
Why is the decibel scale logarithmic?
Show answer
Human hearing covers a huge range of intensities, which a log scale compresses
+10 dB = 10 × intensity; +3 dB = about 2 × intensity.
Give one way to reduce traffic noise for nearby homes.
Show answer
Noise barriers, earth banks or quieter road surfaces
Also double glazing and lower speed limits.
Give one effect of long-term noise on people.
Show answer
Stress, raised blood pressure and disturbed sleep
Very loud noise also damages hair cells in the cochlea.
Play next
- 🧪 Next: Earthworms and farmingRequired technique ST4. Extract earthworms with mustard solution to compare a pasture with a ploughed arable field, using a running mean to check the number of samples.
- 🧪 Previous: Acid rain and seed germinationExtra practical. Water cress seeds with solutions of different pH to see how acid precipitation affects germination.
- 🧪 All AQA A-level Environmental Science practicalsPractise every sampling technique (ST1 to ST6) and the statistics: kit, method, readings and exam questions.
- ❓ Ten question quiz: AQA revision gameTen quick questions from one topic or a whole course.
- ✏️ Crosswords: AQA revision gameFive per topic. Fill in the grid, then check your answers.
- 🃏 Pairs: AQA revision gameMatch each question card to its answer card. Pick your topics, how many cards and how hard.
- 🏝️ KN Island: revision gameRun an island for 12 years (14 in Examiner mode): every choice is real Environmental Science.
- 🔗 Associations: AQA revision gameLink eight key terms on a board and say why each pair goes together.
- 5️⃣ Five Degrees: AQA revision gameGet from one term to another in five steps or fewer, with a link that makes sense at every step.
- 🗂️ AQA A-level Environmental Science revisionEvery topic, with questions and answers, quizzes and crosswords.
